Chavant Photo Gallery

Selected examples of Chavant products


tire10.jpg
Bunt's Concept 400 Series Tire #10Filling the low spots and reworking the form.
tire11.jpg
Bunt's Concept 400 Series Tire #11Now a profile plate has been clamped in position to act as a guide for the template.
tire12.jpg
Bunt's Concept 400 Series Tire #12The form is now complete and is ready for detailing.
tire13.jpg
Bunt's Concept 400 Series Tire #13A 'steel' is used to remove the ripples caused by the template.
tire14.jpg
Bunt's Concept 400 Series Tire #14More work with the steel refines the surface. The remaining low spots ( showing as the dark areas ) are only microns in depth.
tire15.jpg
Bunt's Concept 400 Series Tire #15The finished form polished and ready for the next stage. ................End of Claywork
tire16.jpg
Bunt's Concept 400 Series Tire #16Surface is covered with masking tape and the Bunt's logo is positioned. The outline is then marked through to the clay.
tire17.jpg
Bunt's Concept 400 Series Tire #17This image shows the logo and tread pattern areas cut and removed.
tire18.jpg
Bunt's Concept 400 Series Tire #18Work starts on producing the tread depth.
tire19.jpg
Bunt's Concept 400 Series Tire #19Here the tread shapes have been completed and the surface is coated with shellac.
tire2.jpg
Bunt's Concept 400 Series Tire #02Prior to applying the styling clay, the main surface area receives two coats of shellac to aid adhesion for the clay.
tire20.jpg
Bunt's Concept 400 Series Tire #20Close-up of the Bunt's logo and tread pattern. ........end of treadwork
44 files on 4 page(s) 1