Chavant Photo Gallery

Selected examples of Chavant products


Industrial Design 1


hojoon.jpg

Chavant Industrial Design Section

15 files, last one added on Nov 07, 2016
Album viewed 205 times

Chrome


Sample2.jpg

Chrome on Clay

5 files, last one added on Jul 17, 2016
Album viewed 123 times

Bunt's Concept 400


WS_Framework2.gif

Bunt's Concept 400 Series Tire

44 files, last one added on Jul 18, 2016
Album viewed 174 times

 

3 albums on 1 page(s)

Random files - Chavant Industrial Design
victorycore3~0.jpg
Victory Core 3Courtesy of: Polaris Industries Victory Core Motorcycle
hojoon_2.jpg
Hojoon2By Hojoon Kang
tire3.jpg
Bunt's Concept 400 Series Tire #03The framework is now ready to have the styling clay applied. ...........end of Framework
tire15.jpg
Bunt's Concept 400 Series Tire #15The finished form polished and ready for the next stage. ................End of Claywork
tire21.jpg
Bunt's Concept 400 Series Tire #21This is the clay model ready for a female mould to be taken from it. Note the building up of a flange area, particulary the top curved section on the highest point of the model. This is to poduce a two-part mould, so that the mould will release from the model, allowing for the undercut produced by the tread pattern.
tire30.jpg
Bunt's Concept 400 Series Tire #30The insert cured with the fixing bolts in position.
tire39.jpg
Bunt's Concept 400 Series Tire #39This image shows both mould halves ready to have the inner skins bolted into position. The rubber is then poured into the void between the mould and inner skin, and the mould halves are bolted together.
tire42.jpg
Bunt's Concept 400 Series Tire #42The finished tire showing the sidewall lettering.

Last additions - Chavant Industrial Design
Isik_8009.jpg
Işık University 3These are 1st time students at a workshop in Turkey, Işık University. Instructor, Cem Drahsan. https://www.youtube.com/watch?v=3QOEuPyE73M
Clay Used: AutoStyle Medium
Nov 07, 2016
Isik_7794.jpg
Işık University 2These are 1st time students at a workshop in Turkey, Işık University. Instructor, Cem Drahsan. https://www.youtube.com/watch?v=3QOEuPyE73M
Clay Used: AutoStyle Medium
Nov 07, 2016
Isik_7590.jpg
Işık University 1These are 1st time students at a workshop in Turkey, Işık University. Instructor, Cem Drahsan. https://www.youtube.com/watch?v=3QOEuPyE73M
Clay Used: AutoStyle Medium
Nov 07, 2016
WS_Framework2.gif
Bunt's Concept 400 Series Tire #00The framework for a one sixth segment of half the finished tyre was fabricated to act as a support for the stylingJul 18, 2016
tire44.jpg
Bunt's Concept 400 Series Tire #44The tire featured on the 'TEN' Anniversary Bike - designed and built by Streetfighters-SwitzerlandJul 18, 2016
tire43.jpg
Bunt's Concept 400 Series Tire #43400mm of wide tire. It looks and feels like a real tire. If I hadn't been so pushed for time, I would have looked around for some rubber essence so that it smelt like rubber! Jul 18, 2016
tire42.jpg
Bunt's Concept 400 Series Tire #42The finished tire showing the sidewall lettering.Jul 18, 2016
tire41.jpg
Bunt's Concept 400 Series Tire #41The whole thing is turned over and the process repeated.Jul 18, 2016